-
1 × ₹515.00
-
1 × ₹165.00
-
1 × ₹199.00
-
1 × ₹1.50
-
1 × ₹8.00
-
1 × ₹12.00
-
1 × ₹115.00
-
1 × ₹99.00
-
1 × ₹1.00
-
1 × ₹1.00
-
1 × ₹299.00
-
1 × ₹2.00
-
1 × ₹35.00
-
1 × ₹4.00
-
1 × ₹1.30
-
1 × ₹0.75
-
1 × ₹1.00
-
1 × ₹3.00
-
1 × ₹1.00
-
1 × ₹1,199.00
-
1 × ₹22.00
-
1 × ₹35.00
-
1 × ₹5.00
-
1 × ₹699.00
-
1 × ₹299.00
-
1 × ₹175.00
-
2 × ₹425.00
-
1 × ₹349.00
Roll over image to zoom in
ARDUINO COMPATIBLE LEONARDO R3
₹549.00
The Arduino Leonardo is a micro-controller board base on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs); a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start.
The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication; eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard; in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board
Microcontroller | ATmega32u4 |
Operating Voltage | 5V |
Input Voltage (Recommended) | 7-12V |
Input Voltage (limits) | 6-20V |
Digital I/O Pins | 20 |
PWM Channels | 7 |
Analog Input Channels | 12 |
DC Current per I/O Pin | 40 mA |
DC Current for 3.3V Pin | 50 mA |
Flash Memory | 32 KB (ATmega32u4) of which 4 KB used by bootloader |
SRAM | 2.5 KB (ATmega32u4) |
EEPROM | 1 KB (ATmega32u4) |
Clock Speed | 16 MHz |
Additional information
Weight | 20 g |
---|---|
Dimensions | 68.6 × 53.3 × 10 mm |
Reviews
There are no reviews yet.