L293D MOTOR DRIVER DRIVE SHIELD FOR ARDUINO

135.00

In stock

  • Can drive 4 DC motors or 2 stepper motors or 2 Servo.
  • Tested compatible for Mega, Diecimila & Duemilanove.
  • Can drive 4 DC motors or 2 stepper motors or 2 Servo.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection.
  • Pull down resistors keep motors disabled during power-up.
  • 2 external terminal power interface, for separate logic/motor supplies.

This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.

This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.

L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.

The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to PWM outputs of the Arduino. The L293D chip is also what’s known as a type of H-Bridge.

  • 2 interface for 5V Servo connected to For high-resolution dedicated timer.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  • 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
  • Pull down resistors keep motors disabled during power-up
  • Reset button
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  • 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
  • 2 external terminal power interface, for seperate logic/motor supplies
Package Includes:
    • Arduino Motor Shield for DC Servo & Stepper Motors L293D

 

Additional information

Weight 50 g
Dimensions 70 × 65 × 15 mm
Average Rating

5.00

01
( 1 Review )
5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Add a review

1 Review For This Product

  1. 01

    by Rachna Rana

    SIngle stop for all kind of robotics parts in baroda. many items are not available on site but they are selling directly on shop.

error:

Main Menu

L293D MOTOR DRIVER DRIVE SHIELD FOR ARDUINO

135.00

Add to cart