FTDI FT232RL USB to TTL SERIAL CONVERTER

160.00

In stock

SKU: IFT00011-1 Category:

By using the TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multi view 2.5 is the same as the GPS in the APM pack and any other.

A device that has a TTL port provides the computer with a USB port. By connecting this converter to the computer and installing the driver program, which addsa virtual serial port to the computer ports, which is capable of working with Windows operating systems, MAC, Linux. On the output of this converter, in addition to the TXD, RXD and GND pins, the output voltage is also 5v and 3.3v.

AUSB/TTL converter based on FT232RL high quality, high-performance USB-to-Serial Bridge Controller. The famous manufacturer of USB/TTL converter products produced this chip. The FTDI TTL USB is the latest device to be added to FTDIs range of USB UART interface Integrated Circuit Devices.

This TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RL FTDI MWC Programmer board decrease the cost of Arduino development and increases ease of use. The jumper on the back of the board allows the boards power output and IO level to be configured to either 3.3V or 5V. You can cut the default 5V trace and add a solder jumper to switch to 3.3V.

    • Automatic detection of data transfer speeds up to 1Mbps
    • Data exchange capability with an external interface with UART protocol
    • Output Voltage 5v and 3.3vIndicator LEDs USB Connector
    • With RX and TX Indicator LEDs
    • Manage System for Reducing Flow In Idle and Standby Mode
    • Support for serial output devices such as modems, card reader devices, digital cameras and more.
    • Interface: Mini USB
    • +3.3V and +5.0V signal Level Support using SMD jumper.
    • Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2,Windows CE 6.0
    • DTR and CTS pins. DTR pin can be used for Automatic Reset of Arduino Pro Mini boards while coding downloads
Package Includes:
    • TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer

Additional information

Weight 5 g
Dimensions 43 × 17 × 5 mm
Be the first to review “FTDI FT232RL USB to TTL SERIAL CONVERTER”

Reviews

There are no reviews yet.

error:

Main Menu

FTDI FT232RL USB to TTL SERIAL CONVERTER

160.00

Add to cart