ENC28J60 ETHERNET LAN NETWORK MODULE SHIELD

415.00

In stock

SKU: SHIELD-2-2 Category:

The ENC28J60 is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface. It is designed to serve as an Ethernet network interface for any controller equipped with SPI.

ENC28J60 Ethernet Module utilizes the Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz.

It is a module by which you can put your control board online. And of course you can use it on the Arduino platform. Its function is the same as Ethernet Shield V1.0 for Arduino, so with it you can realize all the functions that you did on the Ethernet Shield V1.0 for Arduino. It is tiny and convenient, you need to connect it with your Arduino board with 10 wires, then you can use it like the Ethernet Shield V1.0 for Arduino.

    • An SPI interface that serves as a communication channel between the host controller and the ENC28J60.
    • Equips control registers for controlling and monitoring the ENC28J60.
    • A dual port RAM buffer for received and transmitted data packets.
    • An arbiter to control the access to the RAM buffer when requests are made from DMA, transmit and receive blocks.
    • The bus interface that interprets data and commands received via the SPI interface.
    • The MAC (Medium Access Control) module that implements the IEEE 802.3 compliant MAC logic.
    • The PHY (Physical Layer) module that encodes and decodes the analog data that is present on the twisted-pair interface.
Features:
    • Fully Compatible with 10/100/1000Base-T Networks
    • Integrated MAC and 10Base-T PHY
    • Supports One 10Base-T Port with Automatic Polarity Detection and Correction
    • Supports Full and Half-Duplex modes
    • Automatic Programmable Retransmit on Collision
    • Programmable Padding and CRC Generation
    •  Automatic Rejection of Erroneous Packets
    • SPI Interface with Clock Speeds Up to 20 MHz
    • Chipboard ENC28J60/SS.
    • The board 25MHZ crystal.
    • The network interface board HR911105A.
    • 5 V power supply pin.
Package Includes:
    • 1 x Ethernet Module ENC28J60

Additional information

Weight 15 g
Dimensions 56 × 34 × 35 mm
Be the first to review “ENC28J60 ETHERNET LAN NETWORK MODULE SHIELD”

Reviews

There are no reviews yet.

error:

Main Menu

ENC28J60 ETHERNET LAN NETWORK MODULE SHIELD

415.00

Add to cart