Login to See Prices

SKU: IFT00059-5 Category:


The “CH376S/CH375 USB read/write module” has a CH376S/CH375 chip onboard which does most of the hard work for you. All you have to do is send the module some commands from the Arduino and the CH376S/CH375 chip will do the rest. You can communicate with the module in three different ways:

  • Parallel communication
  • SPI communication
  • and Serial (UART) communication.

CH376 is used as file manage control chip, used to MCU system read/write file in USB Flash Drive or SD card.
CH376 supports USB-Device Mode and USB-HOST Mode. Set the basic firmware of USB communication protocol in the inner. It is also set firmware of special communication protocol to deal with Mass-Storage devices, communication interface firmware of SD card, FAT16, FAT32 and FAT12 file system manage firmware in the inner. It supports common USB storage devices (contains USB Flash Drive/USB hard disk/USB Flash memory/USB read card) and SD cards (contain SD card with standard capacity and HC-SD card with high capacity, MMC card and TF card compatible with protocol).
CH376 supports three communication interfaces: 8-bit parallel, SPI interface or asynchronism serial interface. DSP/MCU/MPU etc. controller via the any interface of them to control CH376 chip, storage and get file in USB Flash Drive or SD card, or communication with computer.
The USB-DEVICE Mode of CH376 is totally compatible with CH372, the USB-HOST Mode of CH375 is basically compatible with CH375.

Additional information

Weight 20 g
Dimensions 50 × 30 × 10 mm


There are no reviews yet.

Be the first to review “CH376S USB FLASH DISK DRIVE”

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.