ADXL335 MODULE 3-AXIS ANALOG OUTPUT ACCELEROMETER

The ADXL335 is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g. only 320 µA! Sensor ranges from ±3 g. Board comes fully assembled and tested with external components installed.

It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. This breakout board comes with an onboard voltage regulator and works at both 3.3V & 5V (3-5V).

An accelerometer is an electro-mechanical device that will measure acceleration forces. These forces may be static, like the constant force of gravity pulling at your feet, or they could be dynamic – caused by moving or vibrating the accelerometer.

Board comes fully assembled and tested with external components installed. The included 0.1 µF capacitors set the bandwidth of each axis to 50 Hz.

Electrical Characteristics:

• • Analog output
  • Onboard LDO Voltage regulator
  • Designed for 5V logic level
  • Power LED
  • Free-Fall Detection
  • Tap/Double Tap Detection
  • Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
  • Build-in ultra-low noise linear LDO voltage regulator
  • Built-in onboard filters, which reduce noise from the motor and other high current electronics
  • Can be interfaced with a 3V3 or 5V Microcontroller.
  • All necessary Components are populated.

Applications:

• • FPV, RC, and Robots systems
  • 6D-orientation detection
  • GPS navigation systems
  • Free-fall detection
  • Intelligent power saving for handheld devices
  • Vibration monitoring and compensation
  • Motion-activated functions
  • Gaming and virtual reality input devices
  • Impact recognition and logging

Package Includes:

• • 1 X ADXL335  3-axis Analog Output Accelerometer Module angular transducer