Login to See Prices


The A3144 is an integrated Hall effect nonlatching sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A hall effect sensor is much smaller, but can handle less current than a reed switch.The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and open-collector output. An internal bandgap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range.If a magnetic flux density larger than threshold Bop, DO is turned on (low). The output state is held until a magnetic flux density reversal falls below Brp causing DO to be turned off (high).


  • Superior Temp. Stability for Automotive or Industrial Applications
  • 4.5 V to 24 V Operation … Needs Only An Unregulated Supply
  • Open-Collector 25 mA Output … Compatible with Digital Logic
  • Reverse Battery Protection
  • Activate with Small, Commercially Available Permanent Magnets
  • Solid-State Reliability
  •  Small Size
  • Resistant to Physical Stress

Additional information

Weight 5 g


There are no reviews yet.

Be the first to review “A3144 HALL EFFECT SENSOR”

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

  • Selection Required: Select product options above before making new offer.
  • Offer Sent! Your offer has been received and will be processed as soon as possible.
  • Error: There was an error sending your offer, please try again. If this problem persists, please contact us.

Make Offer

To make an offer please complete the form below:

Please wait...