Login to See Prices

SKU: IFT00006/6 Category:


Application environment
Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.
Product Description
[Receiver module ] Product Model:   RX480-E4
Working Voltage : DC3.3~5V
Quiescent Current : ≤5mA
Working Frequency: 433MHz( Others can be customized )
Receive Sensitivity: -108dB
Receive Distance: 150M ( open space)
Frequency band: ±0.2MHz
Working Temperature : -25~75
Working mode: inching, self-locking, interlocking
The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons.
GND : groud or negative pole
+V : DC3.3~5V input
D0: Data output
D1: Data output
D2: Data output
D3: Data output
VT: Output
1. Deleting exist data : Press 8 times learning code button, LED flashes 7 times, cleared OK.
2. Learning remote code : pressing learning key for once, LED turn on , enter into learning mode , then press any button of remote control ,
signaling three times by LED indicator informs about learning remote successfully .
3. Test : after the above operation , the receiver board can be controlled by the remote control .
Transmitting power: 11dbm
Distance: 200M
Emission current: 10MA
Standby current: less than 3UA
Rate of fire: maximum 10KB / S
Transmit deviation: +/- 7. 5KHZ / narrow-band emission
Modulation: ASK
Operating Voltage: DC 3V-24V
Customizable special code: MCU type.Optional fixed encoding type: PT2262 / EV1527 / HT6P20B
Key data: A, B, C, D groups of 4 inputs can be combined into 15 groups.Standby current: <3UA
Each module has a unique ID address code.
All modules K1-K4 four key code is the same.

– : Negative power supply
+: Positive power supply, DC 3-24V
K1: External input keys, short to ground start transmitting data to 1, the A button on the remote control.
K2: External input keys, short to ground 2 start transmitting data, the equivalent of the remote control B button.
K3: External input keys, short to ground start transmitting data 3, the equivalent of the C key on the remote control.
K4: External input keys, short to ground 4 start transmitting data, the equivalent of the remote control D keys.
ANT: transmitting antenna
A typical application circuit is shown below

Additional information

Weight 20 g


There are no reviews yet.

Be the first to review “433 MHZ WIRELESS REMOTE CONTROL”

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.